1. Home
  2. Products
  3. Conventional
  4. L&E MR-16 Mini-Strip (6′ three circuit)

L&E MR-16 Mini-Strip (6′ three circuit)

L&E’s Mini-Strip™ has been referred to as the Rolls Royce™ of MR-16 striplights.  The Mini-Strip has been listed as a U.L. multi-lamp striplight using a wide range of 12 volt MR-16 tungsten halogen lamps. This luminaire is manufactured of die-cast, extruded and sheet aluminum in four standard lengths. These lengths are related to the number of color washes desired. Narrow spot, medium and wide flood lamps are efficiently incorporated into the Zip Strip without trapping appreciable light from these lamps. Since 10 lamps operate in series for each color circuit, lamp failure is noted by neon indicator lamps. Spring loaded lamp holders with push-on sockets provide secure positioning of the lamps to hold them in place while touring. This narrow luminaire allows it to be used on closely spaced battens or in tight spaces where a general wash of light from the top, side or bottom is desired.

  • 6′ Long
  • Three 750w circuits

Additional information

Brand

Light Source

Light Source Wattage

Beam Angle Narrow (degrees)

Beam Angle Wide (degrees)

Zoom

Voltage

Total Power Draw (watts)

Power Inlet

Power Through

Weight (lbs)

  • Spring loaded lamp holder and push-on 2 pin socket
  • Neon indicator lamps to identify lamp failure
  • Large lamp ports to minimize light trapping
  • Compartmented for color separation
  • Uses wide variety of MR-16 lamps (EYF, EYJ, EYC)
  • Narrow profile
  • Multiple circuit units have 36″ feed through lead wires per circuit
  • U.L., c.U.L., and CE listed for 750 watts per circuit
  • Made in the USA

Additional information

Brand

Light Source

Light Source Wattage

Beam Angle Narrow (degrees)

Beam Angle Wide (degrees)

Zoom

Voltage

Total Power Draw (watts)

Power Inlet

Power Through

Weight (lbs)

  • Spring loaded lamp holder and push-on 2 pin socket
  • Neon indicator lamps to identify lamp failure
  • Large lamp ports to minimize light trapping
  • Compartmented for color separation
  • Uses wide variety of MR-16 lamps (EYF, EYJ, EYC)
  • Narrow profile
  • Multiple circuit units have 36″ feed through lead wires per circuit
  • U.L., c.U.L., and CE listed for 750 watts per circuit
  • Made in the USA

Additional information

Brand

Light Source

Light Source Wattage

Beam Angle Narrow (degrees)

Beam Angle Wide (degrees)

Zoom

Voltage

Total Power Draw (watts)

Power Inlet

Power Through

Weight (lbs)

Category:
  1. Home
  2. Products
  3. Conventional
  4. L&E MR-16 Mini-Strip (6′ three circuit)